The kit is not suitable for the beginners, the workflow can be modified as required according to one's experience.
 |
|
 |
10. Prepare rudder flap, laminated piece and click hinge.
|
|
11. On-click hinge on rudder flap.
|
 |
|
 |
12. Laminated piece set to click hinge.
|
|
13. Define spacer among laminated piece and rudder flap on cca 3 mm.
|
 |
|
 |
14. Seat to the plains.
|
|
15. Concoction epoxyd with mixture micro-balons, which are in bag delivery with kit.
|
 |
|
 |
16. Dab mixture on click hinge.
|
|
17. On two click hinge.
|
 |
|
 |
18. Leave 24 clock around setting.
|
|
19. Concoction epoxyd with mixture micro-balons, which are in bag delivery with kit.
|
 |
|
 |
20. Dab mixture on laminated piece.
|
|
21. Laminated part introduction in rudder and guarantee against shift.
|
 |
|
 |
22. Execute verification flap angle to the right.
|
|
23. Execute verification flap angle to the left.
|
 |
|
 |
24. Leave 24 clock around setting.
|
|
25. Mark point for opening wire servo.
|
 |
|
 |
26. Drill hole for wire servo.
|
|
27. Sharpen hole for wire servo.
|
 |
|
 |
28. Mark points for hole.
|
|
29. Drill hole.
|
 |
|
 |
30. Drawing linked hole.
|
|
31. Drawing link all hole.
|
 |
|
 |
32. Cut out, milling opening for servo.
|
|
33. Opening fit and sink emery-paper.
|
 |
|
 |
34. And we've ready opening for servo.
|
|
35. Clip off band fibreglass.
|
 |
|
 |
36. Size up st. tape length for landing gear well.
|
|
37. Clip off on requisite length.
|
 |
|
 |
38. This way yourself setting-up two bands.
|
|
39. Dab second cyanoacrylate glue.
|
 |
|
 |
40. Insertion band into landing gear well.
|
|
41. Press and leave get dry.
|
 |
|
 |
42. It like get up on the other side.
|
|
43. And we've glued-on.
|
 |
|
 |
44. Prepare wiry eye, belong kit.
|
|
45. Dab drop cyanoacrylate glue.
|
 |
|
 |
46. Wiry eye give into drops cyanoacrylate glue.
|
|
47. Fill up bicarbonate.
|
 |
|
 |
48. Prepare landing gear.
|
|
49. Landing gear set in landing gear well and centered.
|
 |
|
 |
50. Landing gear secure drop cyanoacrylate glue.
|
|
51. Prepare wing joiner, piping into fuselage, cockpit and bag with micro-ballon.
|
 |
|
 |
52. Polish wing joiner, which is already dissociation.
|
|
53. Polish wing joiner, which is already dissociation.
|
 |
|
 |
54. Ends piping sharpen.
|
|
55. Deburr piping.
|
 |
|
 |
56. Ends piping sharpen.
|
|
57. Deburr piping.
|
 |
|
 |
58. Into fuselage set hind piping on wing joiner.
|
|
59. Subsequently set prominent piping on wing joiner.
|
 |
|
 |
60. Dismantling bar landing gear.
|
|
61. Protrusion bogie-wheel and we've ready landing gear to laminating.
|
 |
|
 |
62. Fibreglass bands snip on length c. 20 cm.
|
|
63. Concoction epoxyd with mixture micro-balons, which are in bag delivery with kit.
|
 |
|
 |
64. Concoction mixture epoxyd and micro-ballon.
|
|
65. Dab mixture piping and fuselage.
|
 |
|
 |
66. Dab mixture on all piping linked to fuselage.
|
|
67. Mixture stuff spacer intermediate fuselage and landing gear.
|
 |
|
 |
68. Place glass fibre bands and clean epoxyd permeate through.
|
|
69. Permeate through glass fibre bands.
|
 |
|
 |
70. It like work also on the other side.
|
|
71. Cockpit set to fuselage and check, whether we're fuselage no deform.
|
 |
|
 |
72. Leave 24 clock around setting.
|
|
73. End wing joiner grip in pincers and twitch turn about axes.
|
 |
|
 |
74. End wing joiner grip in pincers and twitch turn about axes.
|
|
75. Prepare elastic band and tweezer.
|
 |
|
 |
76. Spread, open tweezers wiry eye.
|
|
77. Run elastic band infra-axillary landing gear.
|
 |
|
 |
78. Run elastic band and take up.
|
|
79. Elastic band set in wiry eye.
|
 |
80. Ensure, press wiry eye.
|
 |
|
 |
81. Prepare scalpel, brake plate and two-sided glue bands.
|
|
82. Draw off capping pass bands.
|
 |
|
 |
83. Sticking brake plate on bands.
|
|
84. Cut pursuant to st. brake plate.
|
 |
|
 |
85. This identical make with second brake plate.
|
|
86. A we've ready both brake plate.
|
 |
|
 |
87. Mark point for opening wire servo.
|
|
88. Drill hole for wire servo.
|
 |
|
 |
89. Sharpen hole for wire servo.
|
|
90. Prepare handsaw to trim away aileron.
|
 |
|
 |
91. Incision aileron on some ends.
|
|
92. Incision aileron on second ends.
|
 |
|
 |
93. Turn wing on underside and incision aileron on some ends.
|
|
94. And on second ends.
|
 |
|
 |
95. Canny fold down aileron and move hinge.
|
|
96. Prepare sand-paper.
|
 |
|
 |
97. Sharpen gap among wings and aileron, so with a view to aileron well move.
|
|
98. Inspect deflection aileron on both sides.
|
 |
|
 |
99. sand down toll aileron.
|
|
100. Mark points for hole.
|
 |
|
 |
101. Drill hole.
|
|
102. Drawing link all hole.
|
 |
|
 |
103. Cut out, milling opening for servo.
|
|
104. Milling of all four opening for servo.
|
 |
|
 |
105. Opening fit and sink emery-paper.
|
|
106. You-mill opening for air-brakes.
|
 |
|
 |
107. You-mill opening for air-brakes.
|
|
108. You-mill opening for air-brakes.
|
 |
|
 |
109. You-milled opening for air-brakes.
|
|
110. Scalpel into-cut ends.
|
 |
|
 |
111. Take out cull fibreglass.
|
|
112. Clean emery-paper toll.
|
 |
|
 |
113. Clean emery-paper toll.
|
|
114. Prepare air-brakes and steering link servo.
|
 |
|
 |
115. Set steering link into air-brakes.
|
|
116. Set steering link into both air-brakes.
|
 |
|
 |
117. Pincers pressing, ensure end steering link.
|
|
118. In this way prepared both air-brakes.
|
 |
|
 |
119. Small-bladed screwdriver click first off hither hinge.
|
|
120. And then hind hinge.
|
 |
|
 |
121. This way prepare both air-brakes.
|
|
122. Prepare scissors, sand-paper and fibreglass case air-brakes.
|
 |
|
 |
123. Scissor fibreglass case air-brakes.
|
|
124. Sand-paper fit and sink fibreglass case air-brakes.
|
 |
|
 |
125. This way prepared both fibreglass case air-brakes.
|
|
126. On wings inspect seat, case air-brakes.
|
 |
|
 |
127. Draw off capping pass bands.
|
|
128. For certainty, insure cyanoacrylate.
|
 |
|
 |
129. Stick case air-brakers, that way so as to fit with opening in wings.
|
|
130. Press ends case to air-brakers.
|
 |
|
 |
131. Push out air-brakers into get dry glue.
|
|
132. A we've down.
|
